Chief among these features is the ability to record at 32-bit floating point to an internal SD card. The unit also functions as an audio interface capable of 32-bit floating point streaming over USB to a Mac computer. This makes it nearly impossible for you to clip (distort) audio on the way in.Whether you're recording hot or making use of the unit's astounding 142 dB dynamic range, you'll only be handicapped by the quality of your microphone. Other improvements include the ability to auto-copy recorded tracks to USB thumb drives, making file transfers a breeze. Lovers of sync will revel in a handy new feature: a full-fledged, built-in timecode generator, accurate to better than 0.2 ppm (0.5 frames in 24 hours). Even when powered off, the MixPre-3 II maintains accurate timecode for up to four hours. All of this is available in a three-channel package that can be powered from wall chargers, computers, AA batteries, or Sony L-series batteries. Whether you use the device in an advanced or basic capacity, the MixPre-3 II will suit any intimate, field-based production. Like the original unit, the MixPre-3 II offers class-A Kashmir mic preamps. All inputs are fully RF-filtered to keep interference out.
Create a mix using the built-in 3x2 portable mixer. When connected to a Mac or Windows computer, the MixPre-3 II can serve as a 5-input / 2-output USB audio interface for your favorite audio recording software. The unit will record three tracks in isolation and provide a stereo mix of all three to boot.The unit can send a complete 32-bit float audio signal over USB when connected to a Mac computer running macOS Catalina (version 10.15 or later). Stream up to two tracks into the unit over USB, using the MixPre-3 II as a recorder from your host device. If you're a musician, you can utilize this feature to record a stereo mix from your host DAW as a backing track for further standalone recording. For inputs, you'll find three XLR jacks.
Headphone output connections are handled over a 3.5mm jack, and stereo line outputs can be secured over a dedicated stereo 3.5mm jack. Timecode I/O is made possible via 3.5mm connections, though you also have the option of HDMI for inputting timecode. Adjust the limiters, change the bit depth, shift panning and polarity in the stereo mix, and filter out extraneous bass rumble with low-cut filters. Whether you record to an SD card or to your computer over USB, the MixPre-3 II can be customized to your needs.
Built-In Timecode Generator & Bluetooth Control. Thanks to the device's timecode generator, you can even trigger recording from the camera.
With built-in Bluetooth, you can control the unit over the Wingman app, available from Sound Devices. This app displays high-resolution meters, current timecode, transport buttons, and more.
The MixPre-3 II is rugged, lightweight, and relatively compact, so you can throw it in a bag or mount it to a tripod or camera. Key Features at a Glance. Kashmir microphone preamps with 48V phantom power. Sample rates up to 192 kHz.
Bit depths up to 32-bit float. SD card recording and reading.
10 seconds of pre-roll at 48 kHz. Add low cut, high pass, delay, polarity invert, and panning.Simultaneous recording, mixing, and USB audio streaming. Trigger record via timecode or HDMI timecode. Bluetooth for wireless control via Wingman app. Basic, advanced, and custom modes.
Sound Devices MixPre-3 II MK2 Audio Field Recorder Mixer Portable" is in sale since Friday, May 22, 2020. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Recorders". The seller is "upayless" and is located in Jersey City, New Jersey.
This item can be shipped to United States.